3M™ 3M6898 Lens Assembly for 6000 Series Full Facepiece Respirator
Item #:
3M6898
Brand: 3M™
Model #: 50051131370062
$96.35
Toggle Nav
Search
-
Contact Us
Get help from our experts
800-867-1083
Office hours
8:30-5:00 PM Central
Product Details
Use as a replacement part on 3M Full Facepieces 6000 Series. The lens is replacable with the following steps
- Remove nose cup assembly from inside facepiece. (Fig. 1)
- Remove center adapter assembly by turning counter-clockwise 1⁄4 turn and withdrawing from lens center port.
- Remove the (2) phillips screws from the lens/faceseal frame. Pull the frame top and bottom away from faceseal.
- Remove faceseal from lens.
- Place new lens and faceseal together aligning marks at top and bottom. Position top and bottom frame, again aligning marks top and bottom. (Fig. 3) Install and securely tighten screws. Make certain alignment marks are properly aligned top and bottom with all components.
- Install center adapter assembly.
- Replace nose cup assembly.
| Brand: | 3M™ |
|---|
| Quantity per case: | 5 EA |
|---|
| California Residents: | Click here for Proposition 65 warning |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. Close |
|---|
Customer Questions
