Close

Ansell HyFlex 11-920 Blue Heather Nylon Gloves with Blue Nitrile Palm Coating

Item #: 119208 Model #: 104458 Brand: Ansell® Gloves
$45.48
$39.84
/ 1 Dozen
 
Size GuideSize Guide

 

Measure around the widest part of palm.

Compare this measurement to the chart to determine your glove size.

 

   

 
Dozen
In Stock

In Stock: Item is in stock and ready to ship. 98.5% of in stock items ship within 24 hours. Shipping times vary depending on your location.

Out of Stock: Item is not in stock currently and is on back order. You may still place an order for the item and it will ship as soon as it becomes available. Please call 1-800-867-1083 for immediate assistance.

Estimated Lead Time X days - Ships direct from vendor: Item is expected to ship from the vendor within the number of business days listed.

Estimated Lead Time X days: Item is not stocked by Magid. Once order is placed item is expected to ship from the vendor within the number of business days listed to Magid and then Magid ships to the customer. Shipping times vary depending on your location.

 
120% Low Price Guarantee
This item is non-cancelable
and non-returnable.
 
 

Description

Ansell's HyFlex 11-920 offers optimal control in slippery situations. Featuring a blue nitrile palm coating on a soft blue heather nylon shell, the 11-920 uses Ansell's patent pending Grip Technology coating to offer some of the best protection on the market. The nitrile layer with microscopic channels actively transfers oils and other lubricants away from the gripping surface, increasing surface contact for enhanced grip and control. The high-tech coating also prevents oil penetration and reduces the risk of dermatitis and liquid exposure. Also, its special nylon fine-gauge liner provides exceptional softness, comfort and breathability.

  • Nitrile layer with microscopic channels actively transfers oils and other lubricants away from the gripping surface
  • Increases surface contact for enhanced grip and control
  • Prevents oil penetration and reduces the risk of dermatitis and liquid exposure
  • Multi-layer dipping process provides high abrasion resistance and increases wear life
  • Special nylon fine-gauge liner provides softness, comfort and breathability


Technical Specs

Warning: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

Close

  • Flame Resistant: No
  • Coating: Nitrile
  • Size: 8
  • Cuff Type: Knit Wrist
  • Shell Color: Blue
  • Gauge: 15
  • Material: Nylon
  • ASTM 2011 Cut Level: 1
  • Quantity per case: 12 DZ
  • California residents: Click here for Proposition 65 warning

Shipping Information

Magid’s warehouse ships out over 95% of orders within 24 hours or less from one central location. In-stock orders placed by noon normally go out the same day. 
 
Free UPS Ground Shipping in the contiguous United States for all orders over $75.*
 
Ground shipping is provided by UPS. We offer 2nd day and Next day air for faster shipping. We also offer customers the ability to use their UPS or FedEx account number. 
 
If you have any problems with your order please feel free to call us at 800-867-1083.

 
 
*Shipping discount applies to customers without negotiated freight. This offer is not valid for items sent Second Day Air or Next Day Air. To verify freight terms, please contact Magid Glove & Safety at 800-863-1083.

Product Q&A

There have been no questions submitted for this product. Be the first!
 

Cut Level Guide

What do the different levels mean?
ANSI Cut Levels used to range from Level 1 (200 gram load) to Level 5 (3,500 gram load) and you may still see these levels referred to in older literature. Today, the levels have been expanded and refined to range from Cut Level A1 (for light cut hazards - 200 gram load) to Cut Level A9 (for high cut hazards - 6,000 gram load)


Which cut level do I need?

Use the chart below to determine the cut level you need in gloves, sleeves, or clothing:



How do you determine cut levels?

We use a specialized testing machine called a Tomodynamometer (TDM-100) to measure cut levels. The machine applies a straight-edged blade under a specific “load.” The load is the amount of pressure being applied with the blade. We gather data from multiple tests under various loads to determine the force required to cut through the sample. That measure gives us the material’s Cut Level.


*Magid Glove & Safety Manufacturing, LLC hereby disclaims any warranty or representation, express or implied, including the products’ or goods’ fitness for any particular purpose. Specifications are subject to change without notice.

Glove Size Guide

 

Measure around the widest part of palm.

Compare this measurement to the chart to determine your glove size.

 

   

What our customers are saying...

Magid consistently has the best overall cost for whatever we buy. We have had other companies quote us, but they can’t touch Magid on price or service. We had our people try it out [Magid ROC work glove] and they liked it. They said the palm coating was better and that it felt good to wear. But the best news of all was that the ROC offered 38% savings over previous glove options – that is a significant savings.

 


 
Close