3M™ Particulate Filter 3M2091, P100

Item #:
Brand: 3M™
Model #: 50051131070009

Product Details

3M Particulate Filter 3M2091, P100 is NIOSH approved for environments containing certain oil and non-oil based particles up to 10 times OSHA PEL with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. against exposure to lead, asbestos, cadmium, arsenic and MDA. Compatible with a variety of 3M half and full face pieces, for use in a variety of applications including: welding, brazing, torch cutting, metal pouring and soldering. 2 Each Per Bag

  • P100 particulate filter
  • Protects against Lead, asbestos, cadmium, arsenic and MDA.
  • NIOSH approved for use in environments with oil and non-oil based particulates The 3M products on this page must be used in accordance with OSHA regulations, and the user instructions, warnings and limitations accompanying each product.
Quantity per case: 50 BG

Magid’s warehouse ships out over 95% of orders within 24 hours or less from one central location. In-stock orders placed by noon normally go out the same day.

Free UPS Ground Shipping in the contiguous United States for all orders over $75.*

Ground shipping is provided by UPS. We offer 2nd day and Next day air for faster shipping. We also offer customers the ability to use their UPS or FedEx account number.

If you have any problems with your order please feel free to call us at 800-867-1083.

Shipping Information

*Shipping discount applies to customers without negotiated freight. This offer is not valid for items sent Second Day Air or Next Day Air. To verify freight terms, please contact Magid Glove & Safety at 800-863-1083.

Customer Questions
What is the estimated service life (in hours) for this filter. I have a service log that has an "estimated service life" column

Thank you for your interest in Magid Glove's Website.The 3M2091 cartridge would have a service life but you need to estimate it yourself.  If you have had your air tested the results should be a guide as to what the time limit should be.&nbsp...

How thick is this filter? I have an AO R51A respirator that has an external "fuzzy" filter which attaches with a think rubber gasket and am looking for a refill.

Thank you for your interest in Magid website and the 3M2091 N95 particulate filter.  The filter 3M2091 will not work with the R51 cartridge filter or the AO mask that you have.  The AO line of masks, filters and cartridges have been discontinued...

I have two masks with R51A cartridges.I need to order at least 4 of the white 3 inch dia filter pads that go over the cartridges. I see all kinds of filter pads but none of them give a diameter. Thank you Lynn

Thank you for your interest in Magid and visiting our website.  The cartridge you have R51A was manufactured by AO Safety which became AEARO and was purchased by 3M and that series of cartridges and filters was discontinued.  The mask, ...

We are blasting with glass. Does the 3M particulate filter P100 protect against this?

Thank you for your interest in Magid Glove's Website.Yes, The 3M2091 P100 filter will protect against glass particles from blasting.If you have any further questions, Customer Service @ 1-800-444-8030 can be of assistance

Did you find what you were looking for?