Magid CutMaster 93KVFLDPM Deerskin Leather Palm Glove, Made with Dupont Kevlar 5000

Item #: 93KVFLDPM-6 Brand: Magid®
$414.72 / 1 Dozen
Buy more & save: $360.60 when you buy 6+
Size GuideSize Guide


Measure around the widest part of palm.

Compare this measurement to the chart to determine your glove size.



In Stock

In Stock: Item is in stock and ready to ship. 98.5% of in stock items ship within 24 hours. Shipping times vary depending on your location.

Out of Stock: Item is not in stock currently and is on back order. You may still place an order for the item and it will ship as soon as it becomes available. Please call 1-800-867-1083 for immediate assistance.

Estimated Lead Time X days - Ships direct from vendor: Item is expected to ship from the vendor within the number of business days listed.

Estimated Lead Time X days: Item is not stocked by Magid. Once order is placed item is expected to ship from the vendor within the number of business days listed to Magid and then Magid ships to the customer. Shipping times vary depending on your location.

120% Low Price Guarantee


Magid’s DuPont Kevlar with the toughness and flexibility of deerskin leather. This innovative glove features 100% Kevlar, medium weight, 7-gauge seamless machine knit shell with deerskin leather on the palm, thumb, index, and middle fingers, as well as fingertips. Kevlar fiber is five times stronger than steel, lightweight and flame resistant to deliver superior protection against a wide range of hazards including cuts, abrasions and exposure to heat without sacrificing comfort or dexterity. The pearl-colored split leather provides excellent abrasion resistance and added protection from heat, incidental cuts and punctures. These sturdy gloves include a colored over edge to reduce fraying, prevent unraveling, maintain a tight fit after washing. Adding to the glove’s thermal protective qualities, a padded inside lining also delivers cushioned support to enhance comfort and wear. The 93KVFLCPM also offers exceptional ANSI cut level 5 protection and ANSI level 4 abrasion resistance.

  • 100% machine knit Kevlar® shell
  • Deerskin leather provides toughness and flexibility
  • Color-coded overedge
  • Padded inner lining offers added thermal protection
  • ANSI cut level 5, abrasion level 4 resistance

Technical Specs

Warning: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.


  • Coating: Leather
  • Size: 6
  • Material Weight: Heavyweight
  • Material: Kevlar
  • Type: Hand Specific
  • ANSI 2011 Cut Level: 5
  • Quantity per case: 6 DZ
  • California residents: Click here for Proposition 65 warning

Shipping Information

Magid’s warehouse ships out over 95% of orders within 24 hours or less from one central location. In-stock orders placed by noon normally go out the same day. 
Free UPS Ground Shipping in the contiguous United States for all orders over $75.*
Ground shipping is provided by UPS. We offer 2nd day and Next day air for faster shipping. We also offer customers the ability to use their UPS or FedEx account number. 
If you have any problems with your order please feel free to call us at 800-867-1083.

*Shipping discount applies to customers without negotiated freight. This offer is not valid for items sent Second Day Air or Next Day Air. To verify freight terms, please contact Magid Glove & Safety at 800-863-1083.

Product Q&A

There have been no questions submitted for this product. Be the first!

Cut Level Guide

What do the different levels mean?
ANSI Cut Levels used to range from Level 1 (200 gram load) to Level 5 (3,500 gram load) and you may still see these levels referred to in older literature. Today, the levels have been expanded and refined to range from Cut Level A1 (for light cut hazards - 200 gram load) to Cut Level A9 (for high cut hazards - 6,000 gram load)

Which cut level do I need?

Use the chart below to determine the cut level you need in gloves, sleeves, or clothing:

How do you determine cut levels?

We use a specialized testing machine called a Tomodynamometer (TDM-100) to measure cut levels. The machine applies a straight-edged blade under a specific “load.” The load is the amount of pressure being applied with the blade. We gather data from multiple tests under various loads to determine the force required to cut through the sample. That measure gives us the material’s Cut Level.

*Magid Glove & Safety Manufacturing, LLC hereby disclaims any warranty or representation, express or implied, including the products’ or goods’ fitness for any particular purpose. Specifications are subject to change without notice.

Glove Size Guide


Measure around the widest part of palm.

Compare this measurement to the chart to determine your glove size.



What our customers are saying...

With the Magid ROC GP150 Work Glove we are saving over 19% on hand protection. That is significant.