Air Systems Galvanized Steel Venturi Style Pneumatic Air Blower
Item #:
ASI1200
Brand: AIR SYSTEM
Model #: ASI-1200
$292.20
Toggle Nav
Search
-
Contact Us
Get help from our experts
800-867-1083
Office hours
8:30-5:00 PM Central
Product Details
The Air Systems Galvanized Steel Venturi Style Pneumatic Air Blower was designed to meet the petroleum industry’s requirements for tank degassing. The base assembly of the Venturi is designed to meet API (American Petroleum Institute) standardized tank opening sizes. The Venturi is bolted to the top of the tank and a ground wire is installed from the blower to an approved ground connection on the tank. The blower operates on compressed air from a compressor or steam via a connect hose from a compressed air source. The Venturi creates a large volume (CFM) of air suction to extract gases and fumes from the tank and discharge the air out a large exhaust cone. The Venturi can also be used to blow positive pressure in a tank, however, the air being forced into the tank should be filtered breathing air if workers will be entering the tank. Installing a ventilation duct on the end of the Venturi will severely reduce the discharged air volume of the device as there is no blower wheel or moving parts to create static pressure.
- 1/2" NPT inlet connection
- 7 5/16" base diameter
- 32 1/8" overall length
| Brand: | AIR SYSTEM |
|---|
| Quantity per case: | 1 EA |
|---|
| California Residents: | Click here for Proposition 65 warning |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. Close |
|---|
Customer Questions
